As my regular readers know I love the Puddle Duck Racer. It’s an ugly but easily built boat that can get you out on the water for a couple of hundred bucks and a couple of weekends worth of work. The web site proclaims: “The PDRacer is a one designe racing sailboat that is basically a plywood box with a curved bottom, and is the easiest boat in the world to build. Free plans, free club. The rules are aimed at keeping the lower 10″ of all hulls the same, but the rest is up to the builder. A simple hull can be made from 3 sheets of plywood, Titebond II glue and latex house paint. If you work hard for two weekends you can go sailing on the 3rd weekend.”
I doubt there is a group of sailors anywhere in the world that have more fun than the owners of these boats. Many have made some remarkable voyages in the Texas 200 the last couple of years and no matter what kind of boats the other participants of the 200 are sailing it seems everyone pulls for the little guys.
Back on October 22 I wrote about a “cruising” version of the boat and suggested that I thought the PDR Goose would be more suitable for a minimalist, easily built inexpensive boat. I did not, however, explain what the Goose was.
The PDR Goose is a stretched-out 12′ version of the PDR and it’s fast building its own following. The Racer has a Yahoo site for its devotees,http://groups.yahoo.com/group/pdracer the Goose recently formed one, too: http://groups.yahoo.com/group/pdgoose/ Unlike the PDRacer, the Goosers (oooooo, that tickles) do not want the boat to become a racing class. They’ll leave that to the one-design class PDRacer. Hey, the boats are cheap and there’s no reason you couldn’t have one of each. The advantage of the larger Goose is that you can more comfortably take along additional crew on your adventures.
This morning in one of my favorite boating blog sites, Duckworks, there was a post in the next-to-last article giving a link to several YouTube videos of a completed Goose under sail. While the Duck is rather clunky having a length to beam ratio of only 2:1 at 4′X8′ but the elongated Goose is 3:1 at 4′X12′. Not only does it look good it seems to sail great as seen here.
And it will get up and plane:
To see more videos of this nice craft underway click this link:
Plans can be downloaded from Duckworks here: http://www.duckworksbbs.com/plans/storer/pgr/index.htm. A good story with lots of photos on the building of a Goose.