Well, it’s amazing how much one can accomplish when one’s in Facebook Prison and free from that trap…
If you’re new to this blog then go back three of four days and you’ll get the back story of this post.
I made my way out to Home Depot and traded in the 3″ PVC pipes I’d gotten yesterday that weren’t the ticket for getting the bed level. As I’ve written, the legs of the bed frame I bought are too large to fit into a 2″ PVC pipe cut to even everything out as shown on a Bob Wells video. The legs are square steel channel. There was a rubber cap on the bottom end. It was easy to remove and I figured “If you can’t fit the leg into a decent PVC pipe then why not insert a PVC pipe inside the leg?” I took the refund in store credit. Have a nice orange card in my wallet I can use at any Home Depot in the country. Since there’s not going to be much weight on the pipe and it’s all downwards without any torque, I sprung for 3/4″ pipe in 2-foot sections at $1.19 each.

Simple as can be.
I got back to the swamp before it got too oppressively hot and humid and finished assembling the bed frame. It takes up almost the entire back of the SUV. It presses up against the back of the seats but the tailgate closes easily. At least I’m not going to have to worry about it moving around back there.
I’m going to have to remove the passenger seat so I’ll have room for the fridge. I’d hoped to be able to place the outboard side of the bed flush against the side of the vehicle by removing the middle leg on that side, (1) but I’d have to get some kind of metal strapping and drill holes in it to hold the side together since it’s made out in two sections. Then, as I’m looking at this, I realize that the curvature at the base of the tailgate opening (2) wouldn’t allow that to happen unless I cut at least that one leg down. I have the tools, but…..

I wanted the platform of the bed to be that high so I could store things beneath it. As you can see the Coleman Instant Tent and the folding table fit easily beneath the bed.


But I’m most likely going to keep the table in the storage box

